87-95 Jeep YJ 4in Leaf Spring
This 5-leaf pack features anti-friction pads and center leaf spacer plates between each leaf to significantly decrease internal friction. These springs are designed to give 4" of lift for the front or rear of your YJ. Sold individually; bushings sold separately.
- 5-leaf design with military wrapped ends.
Uses center leaf spacer plates between each leaf and anti-friction pads for smooth, quiet operation.
Sold individually, bushings sold separately
Information:
Bushings (PN# J7000) NOT Included. Use selection below to add a Bushing/Sleeve Kit.
If installing 4" leaf springs without any additional driveline modifications (ex: SYE/CV driveshaft, motor mount lift) then it is necessary to order and install 4 degree shims on the rear leaf springs and a transfer case drop to correct driveline angles. (Additional shims may be necessary when using a combination of drivelines modifications.) See optional accessory section to add 4 degree rear shims and the transfer case drop to your order. (Shim Kit # U3001 - Center Pin Kit # U3010 - T-case drop kit # J5003).
Sold as a pair.
Application Summary:
| Year |
Make/Model |
| 1987-1995 |
Jeep Wrangler |
This item is a component of the following packages: ZONJ28, ZONJ28N
| Attributes |
| Alternate Part Number |
ZONJ0400 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Center Pin Size |
.313 |
| Country of Origin (Primary) |
CA |
| Emission Code |
Legal US |
| Eye To Center Front |
22" |
| Eye To Center Rear |
20.75" |
| Eye To Eye |
42.50 |
| Free Height |
8.50 |
| Front Eye Diameter |
1.50 |
| GTIN |
00711745600188 |
| Hazardous Material Code |
N |
| Horizontal Position |
Front or Rear |
| Length |
N/A |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
B |
| Number Of Leafs |
5 |
| Overload Spring |
No |
| Pin Size |
N/A |
| Rear Eye Diameter |
1.50 |
| SDR Required Flag |
N |
| Width |
2-1/2" |
