The TeraFlex TJ: Pro LCG Dana 30/44 High Steer System addresses many front-end steering issues associated with lifted TJ Wrangler/Unlimited models. Beefs up steering components, maximizes ground clearance, and corrects steering geometry.
The TeraFlex TJ: Pro LCG Dana 30/44 High Steer System addresses many front-end steering issues associated with lifted TJ Wrangler/Unlimited models. This system beefs up the steering components of the Dana 30 or Rubicon Dana 44 front axle, helps maximize ground clearance, and corrects steering geometry for superior highway drivability. Highly recommended for TJ Wrangler/Unlimited models with 4" or more lift. NOT an all-inclusive kit - may require additional modifications. Also fits ZJ Grand Cherokee, XJ Cherokee, and MJ Comanche with Dana 30 front axles - requires additional modifications. The High Steer HD Aluminum Drag Link and Tie Rod can be used to convert the TJ?s stock steering to a cross steering or a flipped steering setup. ?Flipping" the High Steer HD Aluminum Drag Link over the Knuckle helps eliminate front-end shimmy, bump steer, and other alignment issues. The Drop Pitman arm corrects steering geometry for superior highway drivability. The High Steer Sway Bar Mounts raise the Front Sway Bar up for more clearance for new High Steer components, while the Steering Stabilizer Mount adapts a 9550 VSS Steering Stabilizer to the hexagonal 6061-T6 aluminum tubing used in our HD Drag Link and Tie Rod. Our complete High Steer System (# 1849000) combines our High Steer Knuckle (# 4828490) with our High Steer HD Aluminum Drag Link Kit (# 4920244), High Steer HD Aluminum Tie Rod Kit (# 4920251), Drop Pitman Arm (# 1922133), High Steer Sway Bar Mount Kit (# 4959100), Sway Bar Quick Disconnects (# 1743092), and Steering Stabilizer Mount (# 1510090). Most replacement components available separately. We also recommend our High Steer HD Adjustable Front Track Bar & Bracket Kit (# 4923200). Compatible with all factory and aftermarket axle shafts, ball joints, and wheel hubs. Does not affect operation of ABS.
- Installation does not require any cutting or removal of factory bracketry
Application Summary:
| Year |
Make/Model |
| 1997-2006 |
Jeep Wrangler |
| Attributes |
| California Proposition 65 |
Yes |
| Country of Origin (Primary) |
TW |
| GTIN |
00843885023791 |
| Harmonized Tariff Code (Schedule B) |
8708998175 |
| Hazardous Material Code |
N |
| Included Parts |
High Steer Knuckle w/ 3 Tapered Inserts (# 4828490)o Tie Rod/Drag Link Stock Tapered Insert Sleeve (0.75" O.D.) (# 990175) x 2o Tie Rod/Drag Link Stock Tapered Insert Sleeve (0.875" O.D.) (# 990113), High Steer HD Aluminum Drag Link Kit (# 4920244)o Drag Link End - Stock Taper - 7/8 -18 - Left-Hand Thread (# 4920221) o Drag Link End - Stock Taper - 7/8 -18 - Right-Hand Thread (# 4920222) o Tie Rod/Drag Link End Boots (# 4925100) x 2, High Steer HD Aluminum Tie Rod Kit (# 4920251)o Tie Rod End - Offset Stock Taper - 7/8 -18 - Left-Hand Thread (# 4920231) o Tie Rod End - Offset Stock Taper - 7/8 -18 - Right-Hand Thread (# 4920232) o Tie Rod/Drag Link End Boots (# 4925100) x 2, Drop Pitman Arm (# 1922133), High Steer Sway Bar Mount Kit (# 4959100), Sway Bar Quick Disconnects (# 1743092), Steering Stabilizer Mount (# 1510090), All necessary hardware |
| Install Time |
4-5 hours |
| Life Cycle Status Code |
Available to Order |
| Material |
Steel, aluminum |
| NAFTA Preference Criterion Code |
B |
| SDR Required Flag |
N |
