The front axle experiences tremendous amounts of lateral force while turning and those effects increase exponentially during off-road driving. Front HD Adjustable Track Bars withstand these abusive side loads. Recommended for 3.5-6? lifts.
The front axle experiences tremendous amounts of lateral force while turning and those effects increase exponentially during off-road driving. The TeraFlex TJ: Front HD Adjustable Track Bar withstands these abusive side loads to dramatically improve steering response and handling. Track Bars also allow lateral adjustment of the axle for proper axle alignment as well as cycling through full suspension travel without interfering with other components. This Front HD Adjustable Track Bar is engineered for TJ Wrangler/Unlimited models with 3.5" or more lift. This is the same Front Track Bar used in our Pro LCG Long Arm Suspension Systems (without High Steer System). This Front Track Bar uses a joint in place of the factory tie rod end and MUST be used with our TJ: High Steer Track Bar Bracket Kit (Front Frame: # 1743031) - NOT INCLUDED. NOT compatible with our High Steer Systems. A must for anyone who takes their rig off road!
Application Summary:
| Year |
Make/Model |
| 1997-2006 |
Jeep Wrangler |
| Attributes |
| California Proposition 65 |
Yes |
| Country of Origin (Primary) |
US |
| GTIN |
00843885023074 |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Included Parts |
HD Adjustable Track Bar - Front (3.5-6" Lift), Rubber Bushing - Front Track Bar (# 4313320), Small Joint - Control Arm - Left Hand Thread (# 4116231), All necessary hardware |
| Install Time |
1 Hour |
| Life Cycle Status Code |
Available to Order |
| Material |
Steel, polyurethane, rubber |
| NAFTA Preference Criterion Code |
B |
| SDR Required Flag |
N |
