The TeraFlex JK: Front Track Bar Drop Bracket & Frame Brace Kit addresses many front-end issues prevalent with lifted JK Wrangler/Unlimited models. Highly recommended for JK models with 4" or more lift.
The TeraFlex JK: Front Track Bar Drop Bracket & Frame Brace Kit addresses many front-end issues prevalent with lifted JK Wrangler/Unlimited models. Highly recommended for JK models with 4" or more lift. The Front Track Bar Drop Bracket lowers the Front Track Bar mounting point to correct steering geometry for superior highway drivability. Multiple track bar mounting holes allow you to fine tune the track bar angle to reduce bump steer and other front-end issues. The Frame Brace and Brace Bar reinforce the frame further reducing front end shimmy and excess frame movement. Compatible with all factory and aftermarket axle shafts, ball joints, wheel hubs, and tie rods. Does not affect operation of factory stability and traction control systems including ESP and ABS.
- other front-end issues Frame end Front Track Bar Brace
- Brace Bar reduce frame load to further reduce front end shimmy
- Installation does not require any cutting or removal of factory bracketry Frame end Front Track Bar Drop Bracket corrects steering geometry Multiple track bar mounting holes to fine tune the angle to reduce bump steer
Application Summary:
| Year |
Make/Model |
| 2007-2017 |
Jeep Wrangler |
| 2018 |
Jeep Wrangler JK |
| Attributes |
| California Proposition 65 |
Yes |
| Country of Origin (Primary) |
CN |
| GTIN |
00843885022497 |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Included Parts |
Front Track Bar Drop Bracket - Frame End (# 1953000), Front Track Bar Brace - Frame End, Front Track Bar Brace Bar, All necessary hardware |
| Install Time |
4 Hours |
| Life Cycle Status Code |
Available to Order |
| Material |
Steel |
| NAFTA Preference Criterion Code |
B |
| SDR Required Flag |
N |
