Suspension Lift Kit w/Shocks; 6 in. Lift; Incl. Factory Rear Overload Springs; 4 in. Axle Diameter; Front Driveshaft; V2 Monotube Shocks;
Take your truck to new heights with Rough Countrys 6in Suspension Lift! This all-inclusive kit comes with everything you need for a total trasnformation of your truck. Run up to 37in tires while preserving the smooth, factory ride quality with this impressive upgrade. When changing a vehicles suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. Rough Countrys new 6- in. Suspension Lift features a set of ultra-durable radius arms drop brackets, precision fit to bolt right into the factory mounts for an easier install and a more factory-like angle. This kit includes a set of lifted coil springs and ultra-durable, fabricated anti-wrap rear blocks that prevent binding and axle wrap. Best of all, this kit comes with your choice of Rough Countrys N3, V2 Monotube, or Vertex Adjustable Reservoir shocks! Includes Rough Countrys Lifetime Replacement Warranty
- Easy Bolt-On Installation
- Fabricated Blocks Are Stronger
- Offer A Longer Lifespan Than Cast Blocks
- Specially Designed Anti-Axle Wrap Rear Blocks
- Maintain Stock Ride Quality/Eliminating Common Lift Block Problem
- Increased Ground Clearance
- Levels The Front w/The Rear Of The Vehicle
- Radius Arm Drop Brackets Allow For Properly Set Caster
- Proper Caster Is Crucial
- To Maintaining Factory Handling And Drivability
- Incl. Application Valved N3 Series Shock Absorbers
- Offer The Best In Balanced Performance For On And Off-road Use
Information:
Does NOT fit gas engine models. Does NOT fit dually models. Does NOT fit manual shift transfer cases Does NOT work on models equipped with Tremor Factory Trim Package
Application Summary:
| Year |
Make/Model |
| 2017-2022 |
Ford F-250 Super Duty |
| 2017-2022 |
Ford F-350 Super Duty |
| Attributes |
| California Proposition 65 |
No |
| Category |
Susp Lift Kits 4wd |
| Country of Origin (Primary) |
US |
| Front Components |
Lifted coil springs, Radius arm drop brackets, Front Drive Shaft, Sway-bar links, Track bar drop bracket, Stabilizer relocation brackets, Pitman arm, Brake line brackets, Bumpstop spacers, Hardware |
| Front Kit Components |
Lifted coil springs, Radius arm drop brackets, Front Drive Shaft, Sway-bar links, Track bar drop bracket, Stabilizer relocation brackets, Pitman arm, Brake line brackets, Bumpstop spacers, Hardware |
| GTIN |
00843030169749 |
| Harmonized Tariff Code (Schedule B) |
8708809900 |
| Hazardous Material Code |
N |
| Install Time |
6-8 hours |
| Life Cycle Status Code |
Available to Order |
| Lift/Drop Height |
6 in. |
| NAFTA Preference Criterion Code |
B |
| Rear Components |
Fabricated lift blocks, Brake line brackets, U-bolts, Hardware |
| Rear Kit Components |
Fabricated lift blocks, Brake line brackets, U-bolts, Hardware |
| SDR Required Flag |
N |
| Tire & Wheel Size Combinations |
37x12.50R17 on Factory 17x9, 37x12.50R18 on Factory 18x9, 37x12.50R20 on Factory 20x9, 37x12.50R22 on Factory 22x9 |
| Tire, Wheel, and Offset Info |
37x12.50R17:17x9:8x170:-12:-; 37x12.50R17:17x9:8x170:+0:-; 37x12.50R17:17x9:8x170:+1:-; 37x12.50R18:18x9:8x170:-12:-; 37x12.50R18:18x9:8x170:+0:-; 37x12.50R18:18x9:8x170:+1:-; 37x12.50R20:20x9:8x170:-12:-; 37x12.50R20:20x9:8x170:+0:-; 37x12.50R20:20x9:8x170:+1:-; 37x12.50R20:20x10:8x170:-25:-; 37x12.50R20:20x10:8x170:-24:-; 37x12.50R20:20x10:8x170:-19:-; 35x12.50R20:20x10:8x170:-19:-; 37x12.50R20:20x10:8x170:-18:-; 35x12.50R20:20x10:8x170:-18:-; 37x12.50R20:20x12:8x170:-44:Trimming Required; 35x12.50R20:20x12:8x170:-44:Trimming Required; 37x12.50R22:22x9:8x170:-12:-; 37x12.50R22:22x9:8x170:+0:-; 37x12.50R22:22x9:8x170:+1:-; 37x12.50R22:22x10:8x170:-25:-; 37x12.50R22:22x10:8x170:-24:-; 37x12.50R22:22x10:8x170:-19:-; 35x12.50R22:22x10:8x170:-19:-; 35x12.50R22:22x12:8x170:-44:Trimming Required |
