CV Drive Shaft; Rear; For 4-6 in.; Incl. Flanges; Yokes; Hardware;
This double cardan style CV drive shaft is recommended for Jeep TJ Rubicon models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking. This drive shaft will flex to a nominal 30°s prior to binding and is a direct bolt in replacement that does not require removing the factory original out-put mass vibration dampener hub. It is built on a 2.5in tube diameter and uses the stock 1330 sized universal joint at the rear differential end and a massive 1350 CV head.
- Flexes To A Nominal 30 Degrees Prior To Binding
- Direct Bolt-in Replacement
- Does Not Require Removing The Factory
- Original Out-put Mass Vibration Dampener Hub
- Incl. Better Quality CV Joints
- Shaft Strength Is Twice As Strong
- As The Factory Equipped Drive Shaft
- Grease Fittings Are Out Of The Way Of The Transmission Oil Pan
- Get Grease To The Joints That Need It And Not All Over The Bottom
Information:
Manufacturer: Rough Country Suspension Systems; Part Number: 5088.1; Weight (Lbs): 21.8; Install Time (Hours): 2-3
Application Summary:
| Year |
Make/Model |
| 2003-2006 |
Jeep TJ |
| 2003-2006 |
Jeep Wrangler |
| Attributes |
| California Proposition 65 |
No |
| Country of Origin (Primary) |
US |
| GTIN |
00843030110598 |
| Harmonized Tariff Code (Schedule B) |
8708996805 |
| Hazardous Material Code |
N |
| Horsepower Rating |
OEM |
| Install Time |
2-3 hours |
| Life Cycle Status Code |
Available to Order |
| Material |
OEM |
| NAFTA Preference Criterion Code |
B |
| Position |
Rear |
| SDR Required Flag |
N |
| Usage |
OEM |
