Full Synthetic 10W40 Motorcycle Motor Oil (1 qt, 12pk) has Vis@100°C= 14.5 CSt, Vis@40°C= 92.5 CSt, Viscosity Index= 163, superior film strength, ester base stocks, & friction modifiers compatible with wet clutches (JASO MA applications).

---

The Full Synthetic 10W40 Motorcycle Motor Oil is the go-to viscosity for sports bikes with more antiwear than any other on the market. It is a full-synthetic with PAO and Ester base stocks and 2200 ppm of ZDDP for antiwear. Full Synthetic 10W40 Motorcycle Motor Oil has superior film strength through the use of ester base stocks for protection and ring seal, extended drain intervals over other brands due to higher quality base stocks and excellent dispersants, and specific friction modifiers that are compatible with wet-clutches, suitable for JASO MA applications. Motor oils and gear oils are specifically engineered for the latest high-revving four-stroke motocross bikes, ATVs, Sport bikes, and V-Twins. A variety of Two-Stroke oils meet the NMMA TC-W3 regulations where required.

• Reduces thinning from high temps
• Higher levels of anti-wear chemistry like zinc & phosphorus
• Special friction modifiers for wet-clutch operation
• For four-stroke motocross bikes, ATVs, Sport bikes, V-Twins, & JASO MA applications.

---

Information:

As specified for are four-stroke motocross bikes, ATVs and Sport bikes; Superior film strength through the use of ester base stocks for protection and ring seal; Extended drain intervals over other brands due to higher quality base stocks and excellent dispersants; Blended with specific friction modifiers that are compatible with wet-clutches, suitable for JASO MA applications; Specifically engineered for the latest high-revving four-stroke motocross bikes, ATVs, Sport bikes, and V-Twins; Reduces the thinning effect from high temperatures; Higher levels of anti-wear chemistry like zinc and phosphorus; A variety of Two-Stroke oils to meet the NMMA TC-W3 regulations where required. Typical Properties: API Service Class = SJ/SG/SH JASO MA; SAE Viscosity Grade (Motor Oil) = 10W40; Vis @ 100°C, cSt = 14.5; Vis @ 40°C, cSt = 91; Viscosity Index = 163; CCS Viscosity, Poise, @ °C = 64@ -25; Pour Point, °C = -45; Pour Point, °F = -49; Zinc, avg PPM = 2125; Phosphorus, avg PPM = 2100; Molybdenum, avg PPM = 425; NOACK Evaporation Loss,1hr @ 482°F (250°C), % = 5; % Viscosity Loss, 30 Pass ASTM D6278 = 0; HTHS Vis, cP @150°C, ASTM D4741 = 4.7.