J-Konnect: Builds on J-Venture with heavy-duty J-Link lower control arms to improve strength and correct geometry.
For serious off-road use, step up to a JKS J-Konnect 3.5 suspension system for your Wrangler JL 4-Door. J-Konnect™ can tackle aggressive terrain including rocks and ruts without giving up street manners or breaking the bank. J-Konnect system takes suspension component strength and suspension geometry a step further by adding front and rear fixed-length J-Link lower control arms along with a drag link flip kit and track bar braces. In addition to being significantly stronger than factory control arms, J-LINK lower control arms add front caster and rear wheelbase. Built from 2” x .250-wall DOM tubing, J-LINK control arms provide street-friendly NVH isolation with large factory style rubber bushings at both ends. The drag link flip kit flattens the steering angle to mimic factory angles, while the track bar adds strength and protection. Combined with the matched dual-rate coil springs, custom-valved FOX 2.0 IFP Performance Series monotube gas shocks, an adjustable track bar, Quicker Disconnect sway bar end links, and more. J-Konnect™ is ready for aggressive trail performance. Get connected with J-Konnect.
  • Front/Rear HD Dual Rate Coil Springs designed for great ride quality across any terrain
  • HD springs offer additional load capacity for vehicles equipped with winch bumper, fullsize spare, roof rack, etc.
  • Front/Rear FOX 2.0 Performance Series shocks specifically valved for this suspension system for improved performance on and off-road
  • Front Adjustable Track Bar and Rear Track Bar Bracket to correct axle positioning under vehicle
  • Front Sway Bar Quicker Disconnects and Rear Sway Bar Links for increased offroad articulation
  • Front/Rear Bump Stop Extensions to properly limit suspension up travel
  • Front/Rear J-Link Lower Control Arms to add strength and correct caster

Information:

Rubicon Models (all kits): Tire: 37x12.50; Wheel: 17x9, 18x9, 20x9; Backspacing: 5; Non-Rubicon Models (all kits): Tire: 35x12.50; Wheel: 17x9, 18x9, 20x9; Backspacing: 5; Other tire/wheel sizes can be used, however may require additional modifications.

Application Summary:

Year Make/Model
2018-2024 Jeep Wrangler

This item is a package with the following components:

Attributes
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Coil Spring Included Heavy Duty
Country of Origin (Primary) US
GTIN 00814897016385
Harmonized Tariff Code (Schedule B) 8708807000
Hazardous Material Code N
Installation Difficulty Moderately Easy
Installation Time 7
J-rating J-Konnect
Life Cycle Status Code Available to Order
NAFTA Preference Criterion Code B
SDR Required Flag N
Shocks Included FOX 2.0 Performance Series

Write a review.

Note: HTML is not translated.
    Bad           Good

JKS Manufacturing JSPEC124KFP J-Konnect 3.5 Lift Kit

Product Information

This item is a package with the following components: FOX98524177, FOX98524178, JKS1621, JKS1671, JSPEC1311, JSPEC1352, JSPEC1358

Vehicle Fitment