Hushmat Custom Vehicle Door Sound Deadening and Insulation Kit covers two vehicle car doors.
The 911 door contains no sound deadening or insulation material. This is why your door rattles or vibrates when you shut it. HushMat has packaged the lightweight sound deadening and thermal insulation material to eliminate this cheap sounding rattle and vibration. A HushMat treated door slam is solid. You will experience the HushMat difference every time you open and close your 911 door.
- Eliminates Road Noise; Vibration Up to 50 Percent Noise Reduction
- Proven To Perform From -30 F To 550 F
- Manufactured in the USA for Over 25 years
- Reduces Heat Up To 40 Percent
- Reduces The Noise Floor in Your Vehicle By Up To 10 dB
- Enjoy a Solid Door Slam EVERY TIME
- Automotive OEM Specified and Approved
- Ultra is 1.5mm and Light-weight at 0.47 lbs. Per Square Foot
- HushMat Ultra Requires No Pre-cleaning Of The Application Surface
- No More Acetone Or Alcohol Surface Preparation
- HushMat Ultra Requires No Heat Guns Or Messy Glue To Apply
Information:
Reduce that aftermarket engine, exhaust drone, road noise, vibration and the noise that disrupts your ride and reduce the heat that comes from engine, headers, exhaust and catalytic converter with one USA Made material light weight HushMat Ultra
Application Summary:
| Year |
Make/Model |
| 1998-2021 |
Porsche 911 |
| Attributes |
| California Proposition 65 |
No |
| Cold Flexibility |
Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion |
| Color |
Polymer - Black; Backing - Silver |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Flammability |
Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard |
| GTIN |
00881101822032 |
| Hardness |
6.5 - 9.0mm ?ASTM D-5 |
| Harmonized Tariff Code (Schedule B) |
4008210000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
C |
| Peel Strength |
Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported. |
| R-Value |
7 |
| SDR Required Flag |
N |
| SDS Sheet Number |
NA |
| Safety |
HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product. |
| Shelf Life |
At least 6 months when stored at 40 degrees C or less |
| Specific Gravity |
1.47 (approx. 0.47 pounds per square foot) |
| Temperature Resistance |
HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions. |
| Thickness |
1.5mm |
