Ultra Sound Deadening Material Door Kit contains ten 12 in.x12 in. sheets of Ultra Stealth Black Foil 10 Sq Ft stop rattles, vibrations and road noise

HushMat Door Kit is designed to treat two standard sized car doors. HushMat Ultra is the easiest to install sound deadening and thermal insulating material. There are no tools or adhesives required. Super flexible and moldable. Manufactured in the USA for three decades, rated #1 in performance.

Eliminates Road Noise; Vibration Up to 50 Percent Noise Reduction
Proven To Perform From -30 F To 550 F
Manufactured in the USA for Over 25 years
Reduces Heat Up To 40 Percent
Reduces The Noise Floor in Your Vehicle By Up To 10 dB
Enjoy a Solid Door Slam EVERY TIME
Automotive OEM Specified and Approved
Ultra is 1.5mm and Light-weight at 0.47 lbs. Per Square Foot
HushMat Ultra Requires No Pre-cleaning Of The Application Surface
No More Acetone Or Alcohol Surface Preparation
HushMat Ultra Requires No Heat Guns Or Messy Glue To Apply

Information:

HushMat makes your door slam solid and insulates your vehicle for both noise and heat. HushMats stealth black finish stays hidden and doesn't not reflect light through speaker grills and panels. Reduce road noise and vibrations that make your vehicle noisy.

Attributes
ASIN	B001VKVBHY
Add-On Part	None
California Proposition 65	No
Cold Flexibility	Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion
Color	Polymer - Black; Backing - Black
Country of Origin (Primary)	US
Emission Code	Legal US
FAB	Flexible and easy to mold to complex surfaces offers easy installation without special tools or harmful chemical surface preparation.
Flammability	Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard
GTIN	00881101102004
Hardness	6.5 - 9.0mm ?ASTM D-5
Harmonized Tariff Code (Schedule B)	4008210000
Hazardous Material Code	N
Life Cycle Status Code	Available to Order
NAFTA Preference Criterion Code	B
Peel Strength	Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported., Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported.
R-Value	7
SDR Required Flag	N
SDS Sheet Number	NA
Safety	HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product., HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product.
Shelf Life	At least 6 months when stored at 40 degrees C or less
Specific Gravity	1.47 (approx. 0.47 pounds per square foot)
Temperature Resistance	HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions.
Thickness	1.5mm
Warranty Time	1