HitchLink 3.0 - Machined USA billet aluminum 3.0-inch hitch receiver recovery point
Why reduce a 3" receiver with sleeves when you don’t have to! For Class V 3" hitch receivers ONLY. Our truck owners asked and we listened. NO NEED TO SLEEVE Class V hitch receivers to weaker Class III and Class IV. Finally a hitch receiver shackle mount designed for Class V 3" receivers. Only available in Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish. The HitchLink 3.0 will accept both ¾ and 7/8 shackles and features a machined radius on the shackle mount hole for soft shackle compatibility. It can be oriented inside the hitch receiver allowing the shackle tab to be parallel to the bumper or vertical depending on its desired need. It also eliminates the need to use a receiver sleeve to downsize your receiver to a 2.5 or a 2” adapter.
Why reduce a 3" receiver with sleeves when you don’t have to! For Class V 3" hitch receivers ONLY. Our truck owners asked and we listened. NO NEED TO SLEEVE Class V hitch receivers to weaker Class III and Class IV. Finally a hitch receiver shackle mount designed for Class V 3" receivers. Only available in Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish. The HitchLink 3.0 will accept both ¾ and 7/8 shackles and features a machined radius on the shackle mount hole for soft shackle compatibility. It can be oriented inside the hitch receiver allowing the shackle tab to be parallel to the bumper or vertical depending on its desired need. It also eliminates the need to use a receiver sleeve to downsize your receiver to a 2.5 or a 2” adapter.
- Never exceed factory receiver hitch pull rating
- Rated at 18,000 lbs.
- Ultimate Failure at 70,000+ lbs.
- MADE IN THE USA
Information:
Rated at 18,000 pounds; Never exceed factory receiver hitch pull rating; Always use a quality steel alloy 5/8? hitch pin; Always pull in line with the hitch, do not bind or side load the shackle| Attributes | |
| Add-On | 00064-01, 00036, 00037 |
| Color | GRAY |
| Country of Origin (Primary) | US |
| Finish | Hard Anodized |
| GTIN | 00012748093428 |
| Harmonized Tariff Code (Schedule B) | 8708998180 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Material | 6061 Aluminum |
| NAFTA Preference Criterion Code | B |
| SDR Required Flag | N |
| Tubing Diameter | 00064-01, 00036, 00037 |
| Warranty Time | 1 |
Factor 55 00027-06 Hitchlink 3.0 (3 Receivers) -- Gray
Product Information
- Brand: Factor 55
- Product Number: 00027-06