This is a pair of inline resistors designed for use with 194 168 or 921 size bulb applications such as license plate and cargo lights. Each resistor draws 5 watts of power the same as a standard 194 bulb.
Overview
This is a pair of inline resistors designed for use with 194 168 or 921 size bulb applications such as license plate and cargo lights.
Each resistor draws 5 watts of power the same as a standard 194 bulb. By drawing this extra power it can resolve bulb out warnings that occur in some vehicles due to lower power consumption of LED bulb replacements.
Please note: the base connectors are universal and will not be an exact fit in your vehicle. The bulb holder side is a flexible rubber that is designed to fit loosely in a variety of sockets.
If you wish you can cut off the connectors and wire these resistors inline on your existing license plate bulb circuit. (Wiring and electrical experience required).
- LED Resistor designed for use with 194 168 or 921 size bulb applications
- Each resistor draws 5 watts of power
- Universal connectors
Information:
Included Quantity: Two (2)| Attributes | |
| Add-On | N/A, N/A |
| California Proposition 65 | No |
| Country of Origin (Primary) | CN |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Operating Temperature | -40C to 85C (-40F to 185F), -40C to 85C (-40F to 185F) |
| Roll Length | 10 |
| SDR Required Flag | N |
| Secondary Average Rated Life | No Secondary Average Rated Life |
| Warranty Time | 3 |
| Wattage | 5, 5 |
| Wire Gauge Measurement | 22, 22 |
| GTIN | 00691026115382 |