One 42 inch by 48 inch sheet of Form-A-Shield.
Form-A-Shield(TM) solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400F+, Form-A-Shield(TM) was designed to provide the best possible heat protection in areas where high temperatures are always present and problematic. Form-A-Shield(TM) can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield(TM) can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Ideal for firewalls, exhaust manifolds, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells, under hoods & more Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector
Form-A-Shield(TM) solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400F+, Form-A-Shield(TM) was designed to provide the best possible heat protection in areas where high temperatures are always present and problematic. Form-A-Shield(TM) can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield(TM) can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Ideal for firewalls, exhaust manifolds, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells, under hoods & more Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector
- Can Be Applied Directly To Hot Surfaces
- Durable And Resistant To Oil And Chemical Spills
- 42 in. x 48 in Shield
- Ideal For Firewalls/Exhaust Manifolds Transmission Tunnels
- Superior Insulator Anywhere Near The Path Of Exhaust Pipes
- Withstands Direct Heat Up To 1400 Degrees F
- Constructed From 10 Mil Aluminum Bonded To 1/4 in. Basalt Mat
- Extremely Pliable And Forms To Many Shapes And Configurations
- No Adhesive Backing
- Fasten With Straps/Clamps Or DEI Locking Ties
Information:
Form-A-Shield(TM) solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400F+, Form-A-Shield(TM) was designed to provide the best possible heat protection in areas where high temperatures are always present and problematic. Form-A-Shield(TM) can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield(TM) can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Ideal for firewalls, exhaust manifolds, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells, under hoods & more Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector| Attributes | |
| Backing | Non-Adhesive |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color | Silver |
| Country of Origin (Primary) | US |
| Direct Heat Resistance | 1400°F |
| GTIN | 00607078105165 |
| Harmonized Tariff Code (Schedule B) | 7616990000 |
| Hazardous Material Code | N |
| Includes | One 42 inch by 48 inch sheet of Form-A-Shield. |
| Life Cycle Status Code | Available to Order |
| NAFTA Preference Criterion Code | B |
| Overall Length | 48.000 in., 48.000 in. |
| SDR Required Flag | N |
| Warranty Time | 1 |
| Width | 42.000 in. |
Design Engineering, Inc. 10516 Form-A-Shield 42 x 4ft - 14.0 sq ft - Non PSA
Product Information
- Brand: Design Engineering, Inc.
- Product Number: 10516