The Carli Adjustable Track bar solves all of the issues commonly associated with weak OEM track bars and is a perfect fit for any Jeep owner with a 2.5"-3" lift lookig for a strong replacement.
Carli suspension systems use an adjustable track bar up front and the combination of an adjustable track bar and riser in the rear to correct geometry, center the axles after lifting the JK, and ensure the axle have as little “Yaw,” lateral axle movement causing a wagging feeling during suspension cycling, as possible. Carli adjustable track bars are constructed from ¼-inch wall DOM tubing and use 7/8-inch heat-treated chromoly FK Bearings Heim joints locked in by Carli’s proprietary Jammit nut that provides 100% more surface area than a standard jam-nut. The fixed end of Carli adjustable track bars features our proprietary CUB joint which uses a proven FK Bearings 7/8-inch uniball at its center. Custom molded bushings are pressed on to encapsulate the uniball then the assembly is pressed into the huge, gusseted housing of the track bar with a stainless safety washer and retained with a snap ring.
Carli suspension systems use an adjustable track bar up front and the combination of an adjustable track bar and riser in the rear to correct geometry, center the axles after lifting the JK, and ensure the axle have as little “Yaw,” lateral axle movement causing a wagging feeling during suspension cycling, as possible. Carli adjustable track bars are constructed from ¼-inch wall DOM tubing and use 7/8-inch heat-treated chromoly FK Bearings Heim joints locked in by Carli’s proprietary Jammit nut that provides 100% more surface area than a standard jam-nut. The fixed end of Carli adjustable track bars features our proprietary CUB joint which uses a proven FK Bearings 7/8-inch uniball at its center. Custom molded bushings are pressed on to encapsulate the uniball then the assembly is pressed into the huge, gusseted housing of the track bar with a stainless safety washer and retained with a snap ring.
- Fits 2007-2017 Jeep JKU 4x4 with 2.5"-3" of lift.
- 1/4" wall construction and 7/8" FK heim provides rigid strength.
- Features Carli's signature CUB joint on the frams wide mounting position to minimize vibration and maximize lifespan.
- Fully rebuildable.
- Works ONLY with Carli Rear Track Bar Riser (CS-JATB-07-R-RISER)
Information:
CARLI 14-23 RAM 2500 4X4 DIESEL CARLI SPEC 2.0" RR FRONT & REAR SHOCK PKG 3.25" LIFT RES MOUNTS & BRAKE LINE TABSApplication Summary:
| Year | Make/Model |
|---|---|
| 2007-2017 | Jeep Wrangler |
This item is a component of the following packages: CS-JKU-BC20-07, CS-JKU-C20-07, CS-JKU-PF25-07
| Attributes | |
| California Proposition 65 | WARNING: Cancer - www.P65Warnings.ca.gov |
| Country of Origin (Primary) | US |
| Emission Code | Legal US |
| GTIN | 00883584149941 |
| Harmonized Tariff Code (Schedule B) | 8708807000 |
| Life Cycle Status Code | Available to Order |
| SDR Required Flag | N |
Carli Suspension CS-JATB-07-R Rear Adjustable Track Bar - 3.0" Lift
Product Information
- Brand: Carli Suspension
- Product Number: CS-JATB-07-R
This item is a component of the following packages: CS-JKU-BC20-07, CS-JKU-C20-07, CS-JKU-PF25-07