Monster Exhaust w/Power Elbow, 4-inch Single Exit, Chrome Tip, includes Power Elbow for 2000-2003 Ford Excursion 7.3L Power Stroke
4-inch constant-diameter pipes with Straight-thru muffler. Cuts back pressure up to 81 Percent. Turbo Back System with 5-inch Chrome tip. Includes Power Elbow. EXCURSIONS: Banks 4 inch Monster turbo-back stainless steel exhaust features streamlined turbine-outlet pipe, intermediate pipe and tailpipe all formed of stainless, heavy-wall tubing with constant-diameter bends to maximize flow, lower exhaust gas temps and slash backpressure up to 81 percent. (Available with or without a cast, large-bore Power Elbow housing.). The polished-stainless Monster muffler features a straight-through 4 inch diameter flow-path with a Banks-designed expansion chamber to dissipate the annoying mid-range exhaust drone that affects most straight-through designs. The muffler utilizes spun ceramic, very-high-temperature packing, more than doubles stock exhaust flow, and delivers an authoritative - but never intrusive - exhaust sound. And the 5 inch polished rolled-edge tip has an adjustable clamp for positioning on tailpipe. Get it in your choice of chrome-over stainless or high temp black! (And to help keep it looking good, there's a 1/2 inch air gap to keep heat from tarnishing the finish.).
- Outflows stock by 81% for more power/lowers EGTs
Information:
4 inch constant-diameter pipes;Straight-thru muffler;Cuts backpressure up to 81%;Turbo Back System;5 inch CHROME tip;Includes Power Elbow
Application Summary:
| Year |
Make/Model |
| 2000-2003 |
Ford Excursion |
| Attributes |
| ASIN |
B000ED4R5W |
| Add-On Part |
NA |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Emission Code |
Not in CA |
| Exhaust Type |
Single |
| Exit Position |
Single Side |
| Exit Style |
Turn Out |
| GTIN |
00801279486546 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
4.000 in. |
| Inlet Inside Diameter (in.) |
4 |
| Inlet Size (in.) |
4 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Outside Diameter |
4.000 in. |
| Outlet Outside Diameter (in.) |
4 |
| Outlet Size (in.) |
4 |
| SDR Required Flag |
N |
| SDS Sheet Number |
NA |
| Tail Pipe Diameter |
4.000 in. |
| Tip Diameter |
5.000 in. |
| Tip Size |
5 in. |
| Tubing Diameter |
4.000 in. |
| Warranty Time |
5 |